Crystal XP2 User Manual

PN: 2975 Rev F, 3/2004
Page 20 of 24
PRESSURE is Our BUSINESS
™
Power
Batteries: 3 x AA, alkaline recommended
The XP2 can be operated from an external power supply (AC adapter kit PN: 2984).
Battery Life: 1500 hours continuous operation
Low Battery Indicator: Battery Icon ( )
Dead Battery Indication: “batt”
Certifications
The XP2 has been tested and certified to comply with a variety of international standards.
C-tick
This XP2 complies with the Australian requirements for the C-tick mark. The
instrument was tested against AS/NZS 3584, C-tick EMC/EMI requirements.
Connection
Pressure Fitting: ¼″ male NPT with integral
1
/
16
″ NPT stainless steel filter.
Enclosure
Stainless steel, designed to meet NEMA4 and IP66.
Weight: 500g (17.6 oz.), including batteries.


 








  
PSI inH
2
O inHg kpa
mmHg mmH
2
O mbar kgf/cm
2
LO
HI


C R Y S T A L
engineering corporation
  







 
  
 

Crystal XP2 Specifications

General

Accuracy	±0.25% FS
Display	LCD
Pressure media	Non-corrosive gases
Operating temperature	32°F to 122°F (0°C to 50°C)
Measurement Range	0 to 15 psi
Operating Humidity	90% RH (non-condensing)