EasyManuals Logo

Crystal XP2 User Manual

Crystal XP2
24 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
PN: 2975 Rev F, 3/2004
Page 24 of 24
PRESSURE is Our BUSINESS
Warranty
Crystal Engineering Corporation warrants the XP2 Digital Test Gauge to be free from defects
in material and workmanship under normal use and service for one (1) year from date of
purchase to the original purchaser. It does not apply to batteries or when the product has
been misused, altered or damaged by accident or abnormal conditions of operation.
Crystal Engineering will, at our option, repair or replace the defective device free of charge
and the device will be returned, transportation prepaid. However, if we determine the failure
was caused by misuse, alteration, accident or abnormal condition of operation, you will be
billed for the repair.
CRYSTAL ENGINEERING CORPORATION MAKES NO WARRANTY OTHER THAN
THE LIMITED WARRANTY STATED ABOVE. ALL WARRANTIES, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE,
ARE LIMITED TO A PERIOD OF ONE (1) YEAR FROM THE DATE OF PURCHASE.
CRYSTAL ENGINEERING SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT, TORT OR OTHERWISE.
Note (USA only): Some states do not allow limitations of implied warranties or the exclusion
of incidental or consequential damages, so the above limitations or exclusions may not apply
to you. This warranty gives you specific legal rights and you may have other rights which
vary from state to state.
How to Contact Us:
Phone. . . . . . . . (805) 595-5477
Toll-Free . . . . . (800) 444-1850
Fax . . . . . . . . . . (805) 595-5466
Email . . . . . . . . service@crystalengineering.net
Web . . . . . . . . . www.crystalengineering.net
If calling, have ready the model number, serial number, date of purchase and reason for
return. You will receive instructions for returning the device to Crystal Engineering.
Send your comments to: feedback@crystalengineering.net
© 2002, Crystal Engineering Corporation
708 Fiero Lane, Suite 9
San Luis Obispo, CA 93401-8701

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crystal XP2 and is the answer not in the manual?

Crystal XP2 Specifications

General IconGeneral
Accuracy±0.25% FS
DisplayLCD
Pressure mediaNon-corrosive gases
Operating temperature32°F to 122°F (0°C to 50°C)
Measurement Range0 to 15 psi
Operating Humidity90% RH (non-condensing)

Related product manuals