ENGLISH
HEARTH GLASS DOOR
The glass used for the stoves is ceramic, resistant to high temperatures. Should it be damaged (e.g. chipped) it
is recommended to have it replaced immediately by an authorized technician before using the machine again.
To clean, use a non abrasive cloth with specific liquid for glass cleaning.
DO NOT attempt to repair damaged glass, replace it: as there is a risk of explosion during functioning!
HEAT EXCHANGING TUBE CHANNELLING
According to the model, there are one or two levers (fig.30) for internal cleaning
placed along side the hot air outlet. . It is advisable to move these levers both
ways at least once a day when the stove is cold, in order to let all the combustion
residues fall into the ash box.
HEARTH DOOR SEAL
Frequently check the conditions of the seal fixed along the internal border of the hearth door to ensure a tight
closure.
Note: check the tightness of the seal by inserting a piece of paper into the crack of the door whilst shut,
ensuring that this process is possible but proves difficult. If this is not the case contact an authorized after
sales service centre to have the seal replaced.
AIR FILTER
Every 15 days remove the air filter positioned behind the stove (according
to the model) pulling from an angle and cleaning it with low pressure air or
vacuum or wash it under running water, drying it before repositioning it
(fig.31).
GENERAL END OF SEASON CLEANING
After use, at the end of the season, clean and check all the parts indicated above, remembering to disconnect
the power supply of the stove for increased safety.
It is advisable to check and clean the machine at least once per year by an authorized technician to ensure
correct functioning.
It is recommended, when required, to check lubrication of the pellet auger bronze bearings.
To Previous Page
Loading...
