CSC City Slicker - Cush Drive Replacement

CitySlickerOwner’sandServiceManual
www.CSCMotorcycles.com

45


CushDriveReplacement

TheCitySlickermotorcyclehasacushdrive.Ifthemotorcycledrivetrainfeelserraticorsnatchywhen
starting,itmaybeduetocushdrivedegradation.Inthatcase,thecushdrivecushionsshouldbe
replaced.
Theleftsideoftherearaxleandtheswingarm.

Removetherearwheelinaccordancewiththerearwheelprocedureinthismanual.
Liftthedrivepulleyoffoftherearwheel.

Oncethedrivepulleyhasbeenremovedfromtherear
wheel,placethebushing(denotedbythearrowontheright)
thatfitsbetweenthepulleyandtherearwheelinasecure
place.Notethatthereare4cushdrivecushions(denotedby
theleftarrow).

Removethefourcushions.

Assemblyisthereverseofdisassembly.