Need help?Do you have a question about the CSC City Slicker and is the answer not in the manual?
General| Brand | CSC |
|---|---|
| Model | City Slicker |
| Category | Motorcycle |
| Language | English |
Introduction to the owner's and service manual contents and purpose.
Explanation of symbols used to indicate potential hazards or damage.
Essential safety instructions for operating the motorcycle on public roads.
Key physical and performance specifications of the City Slicker motorcycle.
Pre-ride checklist to ensure the motorcycle is safe to operate.
Identification of major components and location of VIN and motor numbers.
Explanation of motorcycle controls, operation, and handlebar switchgear.
Summary and details of the instrument cluster indicators and switches.
Explanation of the reverse drive feature and its usage.
Instructions and information on charging the motorcycle battery.
Important warnings and cautions for safe battery charging.
Step-by-step guide for charging the motorcycle battery.
Proper methods for cleaning the motorcycle's exterior surfaces.
Guidelines for preparing and storing the motorcycle for extended periods.
Methods for cleaning and inspecting motorcycle components after disassembly.
Schedule for preventive maintenance tasks based on mileage.
General torque specifications for various bolts and fasteners.
Procedure for unpacking the motorcycle and performing initial checks.
Maintenance guidelines for the motorcycle's frame and body panels.
Troubleshooting common issues related to the frame and bodywork.
Safety warnings and general information regarding battery removal.
Step-by-step instructions for safely removing the motorcycle battery.
Procedure and warnings for removing body panels for access.
Instructions on safely supporting the motorcycle on a jack.
Procedures for removing the front and rear wheels.
Detailed steps for removing the front wheel.
Detailed steps for removing the rear wheel.
Introduction to the brake system and its maintenance.
Procedure for inspecting and replacing front brake pads.
Procedure for inspecting and replacing rear brake pads.
Instructions for flushing and replacing the brake fluid.
Procedure for bleeding air from the brake system.
Procedure for removing wheel bearings.
Overview of suspension maintenance activities.
Procedure for replacing front fork seals.
How to adjust the preload on the rear shock absorber.
Checking and maintaining tire pressure and condition.
Procedure for aligning the rear wheel and adjusting the drive belt.
Procedure for replacing the cush drive cushions.
Safety warnings and overview for motor removal and replacement.
Procedure for removing and replacing the drive belt.
Identification of the locations of various electrical components.
Specific details and images of electrical components under the seat.
Procedure for removing and replacing the headlight assembly.
Procedure for removing and replacing the instrument cluster.
Procedure for removing and replacing the ignition switch module.
Procedure for removing and replacing rear turn signal/brake light LED.
Procedure for replacing the license plate lamp.
Safety warnings and overview for controller removal and replacement.
Using the built-in test equipment to diagnose faults.
List and explanation of fault codes displayed by the system.
To Next Page
