3
Maintenance Schedule: COBRA
Frequency
Daily
3,000
4,000
8,000
12,000
16,000
20,000
24,000
Item
Brake Pads and Rotors [1]
I I I I I I
Half Shaft Boots
L L L L L L
Gear Box Oil [2]
R R
Wheel Bearings [3]
I I I I I I
Rear End Oil [4]
R R
Wheels and Tires I I I I I I
All Lighting
I
Tire Pressure
I
Brake fluid I I R I I R
PWR TRAK Head Bearings
T T T
I: Inspect and clean, adjust, lubricate, and/or replace if necessary.
R: Replace
L: Lubricate with Silicone Spray REAR TIRE PRESSURE 28 PSI
T: Torque of Head Bearings (top nut 80 ft.-lbs. adjuster nut 30 ft.-lbs.)
This Schedule is in addition to the Honda Maintenance
Schedule
NOTE:
[1] Minimum pad thickness is .04 inches (1.02mm)
[2] Gear Case oil should be changed after the first 3 months or
3,000mi., whichever comes first. Gear Case oil should then be
changed every 12 months or 20,000mi. Use only NON-
synthetic 80W-90 GL-5 gear oil.
The Gear Case should contain 6 oz.
[3] Wheel bearing torque 200 FT. - LBS.
[4] Rear end oil should be changed after the first 3 months or
3,000mi., whichever comes first. Rear end oil should then be
changed every 12 months or 20,000mi. Use only NON-
synthetic 80W-90 GL-5 gear oil. The differential case should
contain no more than 1 qt of gear oil.
At higher odometer readings, repeat at frequency intervals established
here.
To Next Page
Loading...