CSC COBRA - GFX and Reverse Bulb Replacement

6
Replacement of GFX &
Reverse Bulbs
1. Locate rubber socket cover over backside of
reverse/ground effects bulb housing.
Remove by pulling it off.
2. Locate the #2 Philips head screws in the
center of the housing and remove screw.
Remove with black ground wire.
3. Remove bulb, cut white wire.
4. Using a wire connector, connect the white
wire to the new bulb.
5. Reinstall in reverse order and test.
Bulb is a 55 watt H3 driving lightbulb.
6.