Operation Guide
Starting and Driving Operation
1
2
3
5
1. Turn the switch lock to the position“ ” and turn on the
ignition of the electric vehicle.
2. Hold the front and rear brake levers to prevent the
motorcycle from sliding.
3. Please use the left blinker to warn pedestrians and cars when
exiting your spot.
4. Retract the kickstand to unlock the controller’s safety
mode.
5. Release the front and rear brakes, turn the throttle
slightly with your right hand to move the electric
vehicle slowly, and then put your feet on the pedals.
Caution
1. When you park the bike and lower the kickstand, it goes into safety mode where the controller cuts the power and the motor
stops the bike from moving. This stops someone from accidentally turning the handlebars and making the bike take off.
2. The motorcycle takes 2 seconds for the bike to do a self-check, and it’s good to go when the light on the dashboard turns
green.
3.Please wear protective equipment (e.g. helmet, protective gloves, protective glasses, protective clothing, etc.) before driving.
.
19
.
4
and Driving
To Next Page
Loading...
