.
27
.
Inspection of wheels
1. Maintaining the proper tire pressure is important for the performance and safety of the vehicle. Overinflated tires will reduce the
ride quality and increase the wear of various components. Underinflated tires will increase the rolling resistance and the energy
consumption. In severe cases, underinflation may cause local separation of the tire layers and lead to tire blowout.
2. When the inner tube valve core leaks, repair or replace the valve core. Repair or replace the inner tube when it leaks.
3. Regularly check and adjust the wheels.
Outer tire wear limit value
Yaw limit value of wheel
Caution
Maintenance of drive motor
This vehicle features a permanent magnet DC motor mounted at the center, which achieves an efficiency of over 92%. This
design offers several benefits, such as enhanced hill-climbing capability, high speed, low current draw, extended range, and
smooth coasting.
1. If the inside of the motor gets wet, the insulation may deteriorate. To dry the motor, take it apart and drain the water. Use a
blower or let it air dry in the sun. Check the motor resistance and the position sensor. Replace them if they are damaged.
2. Inadequate battery charging will result in short continuous driving range of electric vehicles and weak driving motor, so the
battery should be kept fully charged.
Low-speed and high-speed brushless motors
are not interchangeable with each other.
Maintenance
To Next Page
Loading...
