4
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will cause
swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that Dow Corn-
ing® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound is used in the
manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended that
Teflon® tape be used to seal plastic Noryl® threaded fittings.
Specifications
General Specifications
SK15 SK25
Smart Blend 1.5 cu. ft. 2.5 cu. ft.
Gravel Underbedding 20 lbs. 50 lbs.
Mineral Tank 10 X 54 13 X 54
Service Flow Rate - Continuous (GPM) 5 8
Service Flow Rate - Intermittent (GPM) 7 10
Backwash Flow Rate (GPM) 5.0 7.0
Gallons Used / Backwash 106 146
Space Required (D x W x H inches) 10 X 21 X 61 13 X 24 X 61
Approximate Shipping Weight 160 254
General Specifications
SK15S SK25S
Catalytic Carbon 1.5 cu. ft. 2.5 cu. ft.
Gravel Underbedding 20 lbs. 50 lbs.
KDF Cubes 1.5 lbs 2.5 lbs
Mineral Tank 10 X 54 13 X 54
Service Flow Rate - Continuous (GPM) 5 8
Service Flow Rate - Intermittent (GPM) 7 10
Backwash Flow Rate (GPM) 5.0 7.0
Gallons Used / Backwash 106 146
Space Required (D x W x H inches) 10 X 21 X 61 13 X 24 X 61
Approximate Shipping Weight 120 191
To Next Page
Loading...
