CTC Union IGS+803SM-8PH - LAN and Fiber Ports; Poe Ports; RJ-45 Ethernet Port Pinouts; RJ-45 Ethernet & Poe Pin Assignments

12
LAN and Fiber Ports
IGS
+
803SM-8PH(E) models have 8 LAN ports (labeled 1~8) and 3
fiber ports (SFP based, labeled Fiber 9~11) on the front panel. The LAN
ports that utilize shielded RJ-45 connectors support 10/100/1000M;
while the fiber SFP ports support 100/1000M.
PoE Ports
All 8 LAN ports support PoE (Power over Ethernet) per IEEE802.3af
(15.4W) or IEEE802.3at (30W) for connection to standard PoE PD (Power
Devices) such as IP Cameras, Access Points, IP Phones, Digital Signage,
etc. PoE eliminates the need to run separate power to these devices
thereby simplifying deployment and reducing expenses.
The LAN ports may also connect to any non-PoE device for normal
Ethernet transmission without any damage to the non-PoE device or to
this device.
RJ-45 Ethernet Port Pinouts
RJ-45 Ethernet & PoE Pin Assignments
Pin
No.
RJ-45 Ethernet
PoE
Output
100Base-TX
1000Base-T
1
RX+
TRD 0+
V+
2
RX-
TRD 0-
V+
3
TX+
TRD 1+
V-
4
-
TRD 2+
5
-
TRD 2-
6
TX-
TRD 1-
V-
7
-
TRD 3+
8
-
TRD 3-