CTC Union IGS+803SM-8PH User Manual

7
Telnet/SSH Connection
To use Command Line Interface (CLI), you can also choose to
access the device through a Telnet/SSH connection via TCP/IP network
over Ethernet ports. For initial operation, use the default TCP/IP settings
(10.1.1.1) to login to the device.
Default TCP/IP settings:
IP Address:
10.1.1.1
Subnet Mask:
255.255.255.0
Username:
admin
Password:
No password (Press "Enter"
key)
To change the default IP address to your desired one (for example,
192.168.0.10/24), issue the following commands:
Once the desired IP address has been configured, a web browser
can be accessed and used to configure the device through a more easy-
to-use GUI (graphical user interface). For complete CLI operation, please
refer to the operation manual.
#
# config terminal
(config)# interface vlan 1
(config-if-vlan)# ip address 192.168.0.10 255.255.255.0

CTC Union IGS+803SM-8PH Specifications

General

Brand	CTC Union
Model	IGS+803SM-8PH
Category	Switch
Language	English