CTC Union IGS+803SM-8PH - Specifications; Ethernet Interface; Optical; Switch Features

9
Specifications
Ethernet Interface
 Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab
(1000Base-T)
 RJ-45 (shielded) Ports: 8 ports
 Speed: 10/100/1000M (Auto)
Optical
 Standards: IEEE80802.3u (100Base-FX), 802.3z (1000Base-X)
 SFP-Based Slots: 3 slots
 Speed: 100/1000M (Manual)
Switch Features
 Store & Forward Switch
 Supports IEEE802.3x Flow Control
 Auto MDI/MDI-X
 Duplex: Full/Half (Auto-negotiation per IEEE802.3u)
 Switching Fabric: 22Gbps (Non-blocking)
 Memory Buffer: 512K Bytes
 MAC Table: 8K
 MTU: 64~9600 bytes
Power over Ethernet
 8 PoE enabled ports, End Span Alternate A Mode
 Support IEEE802.3af 15.4watts PoE per port
 Support IEEE802.3at 30watts PoE+ per port
 Total 240W power budget (maximum), 30W per port
 Positive (V+) pins 1,2; Negative (V-) pins 3,6; Data 1, 2, 3, 6, 4, 5, 7, 8
Power
 Redundant dual DC 48V (44V~57VDC)
(50V~57V is recommended for IEEE802.3at PoE 30W applications)
 Support Power Input Reverse Polarity Protection
 Support Dual Power Inputs
 Removable terminal block connectors
 Power Consumption:
Items
Input Voltage
Total Power
Consumption
Device Power
Consumption
PoE Budget
50VDC
255.5W
15.5W
240W