EasyManua.ls Logo

CTM HS-268 - Taillight Repair

Default Icon
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
Taillight Repair :
SERVICE - 11 - 2
Follow the SERVICE-1 Steering Top Cover Repair steps and
then :
Find the main cable connector (see picture on the right).
Check the connector for security and reconnect if necessary
(picture of the right).
If this does not restore function, refer to the following method.
Please follow the SERVICE-11 Rear Top Cover Repair steps
for removal, then :
Find the taillight connector (figure on the right)
Check the connector for security and reconnect (figure on
the right)
If this is not effective, go to the following “Replacement
Instructions”.
Replacement Instructions :
Please follow the SERVICE-11 Rear Top Cover steps for removal, then :
1.Locate the taillight at the rear of the scooter.
2.Remove the two screws holding the rear cover.
3.Take out the taillight and replace it with a new one.
When reassembling, please follow the exact reverse sequence of these steps.
If this does not restore function, refer to.
SERVICE-1-1 Top Control Panel Repair, or
SERVICE-11-1 DR Controller Repair to replace a faulty board.

Related product manuals