Ctouch Riva - Setting Menu Configuration; Network and Device Settings; Picture and Sound Settings

Riva
2322
Share, inspire, have fun!
With CTOUCH by your side.
Manual CTOUCH Wallom2 wall lift
Share, inspire, have fun!
With CTOUCH by your side.
ctouch.eu
Network & connected devices
Ethernet Connect to Ethernet
Wi-Fi Connect devices with Wi-Fi
Internet Hotspot Set-up your local hotspot
Bluetooth Connect devices with Bluethooth
Picture
Energy mode Select the energy mode of the display
Zoom Mode
Select the aspect ratio (display proportions) according to your video signal type or
personal preference
Viewing experience
Picture mode Select picture mode
Colour profile Select colour profile
Backlight Set the overall brilliance of the screen
Eye protection
Set up eye protection - while writing the backlight will be automatically decreased for eye
protection
Blue light filter Set the blue light filter
Advanced
PC mode Image processing optimized specifically for attached PC input - only for HDMI
Overscan
Adjust the reproduction ratio, you may activate this function to obtain a cleaner picture
Note: Overscan is only adjustable when PC mode is off & the signal is under 4K resolution.
VGA Auto adjust Automatically adjust the image settings such as position and phase
Sound
Sound mode Select sound mode
Media out device Select the sound output
Sound Quality
Balance Adjust volume level of right and left speakers
AVC
Select [On] to equalize overall volume levels across all channels
Select [Off] to turn off the auto volume control
Sound effect Select the digital signal processing (DSP)
SPDIF
SPDIF mode Select the digital audio output mode for SPDIF
SPDIF volume Adjust SPDIF volume
SETTING MENU
NETWORK & CONNECTED DEVICES DEVICE: PICTURE & SOUND