EasyManua.ls Logo

Ctouch Riva - Remote Control and Basic Operations; Remote Control Functions; Powering On and Off

Ctouch Riva
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Riva
15
Share, inspire, have fun!
With CTOUCH by your side.
ctouch.eu
Switch the CTOUCH interactive
display power on or off
Confirm or enter a sub-menu or
toggle between options during
menu operation
Home page of the CTOUCH
interactive display
Display or exit the setting menu
screen
Mute the sound
Freeze the current picture
Volume down
Display or exit input source menu
Use Arrow buttons to navigate in
on-screen menu
Return to previous menu or exit the
on-screen menu
Turn off the picture on the CTOUCH
interactive diaplay and listen to the
program audio only
Volume up
Take a screenshot and store the
data onto your connected USB
storage device. If there is no USB
storage, the screenshot will be
stored on the built-in storage.*
REMOTE CONTROL BASIC OPERATIONS
TURNING THE CTOUCH INTERACTIVE DISPLAY ON OR OFF
1. Plug one side of the power cord into the AC power outlet and the other side into the wall
socket.
2. Switch on the Power Switch to turn the CTOUCH interactive display on.
3. The display is in standby mode now. Wait a moment until the power indicator lights up, then
press
button on the remote or the CTOUCH button on the display, to turn the CTOUCH
interactive display on.
4. Press
button on the remote or the CTOUCH button on the display again, to turn the CTOUCH
interactive display in standby mode.
5. Switch off the Power Switch to cut off the power completely.
Note: The CTOUCH interactive display needs some time to shut off correctly before it can be
switched on again. By interupting this proces the next start up can take longer.
Note: When there is no active source on the CTOUCH interactive display, it will go into stand-by
mode after 3 minutes.
CONNECTIONS
Make sure both the external device as well as the CTOUCH display are turned off, when
connecting the external device to the CTOUCH display.
Check the plugs at the ends of the cables to make sure that they are the correct type, before
plugging them into the jacks of the CTOUCH interactive display.
Note: For an overview of the possible external connections, please refer to the CTOUCH user
manual on your display. Or visit support.ctouch.eu
* The function differs depending on the model you have.

Related product manuals