7-14 Your Vehicle
5. Dry the spark plugs and reinstall them, or
install new plugs.
6. Attempt to start the engine. If necessary,
repeat the drying procedure.
CAUTION:
Make sure all components that are washed
and assembled are coated lightly with
grease.
7. Take the vehicle to your service center
for service as soon as possible, whether
you succeed in starting it or not.
8. If water has been ingested into the CVT,
make sure to inspect the hole and there
is no water left inside. If it is muddy water,
open the CVT cap and wash the parts
before you reassemble.
9. Check the gearshift, release the water
inside. Wash if necessary.
1．Air filter case check hose
To Next Page
Loading...
