6-5 Operation
1. Drive select lever
3. Release the brakes and press the
accelerator pedal gradually.
Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off the
accelerator pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice versa
by moving the drive select lever along
the shift guide.
NOTE:
● Always depress the brake pedal before placing
the gearshift lever to“reverse”position.
● In the brake pedal, there is a cable, which is
connected to a position pin located on the
gearshift assembly. Only when the brake pedal
is depressed, the position pin will be retracked,
and gearshifts can be removed to “reverse”
position.
1. Position pin 2.Cable 3. Adjust
To Next Page
Loading...
Need help?
General
