Cub Cadet Challenger 700 Operator's Manual

1. Drive select lever
NOTE:
● When in reverse, the reverse indicator
light should be on. If the light does not
come on, ask a service center to inspect
the reverse indicator light electrical
circuit.
● Due to the synchronizing mechanism in
Operation 6-6
the engine, the light may not come on
until the vehicle starts moving.
4. Check behind for people or obstacles,
and then release the brake pedal.
5. Press the accelerator pedal gradually
and continue to watch to the rear while
backing up.

Cub Cadet Challenger 700 Specifications

General

Brand	Cub Cadet
Model	Challenger 700
Category	Utility Vehicle
Language	English