Cubic Communications CDR-3250 - Page 51

CDR-3250/80 TECHNICAL MANUAL
3-26 Issue 2.2
To start and stop the sweep function, do the following:
Scan/Sweep Soft Key Menu.
SCAN SWEEP STEP DWELL BRIDGE
MTR
MNU
NEXT
Press the SWEEP key and the following menu appears.
Scan/Sweep - SWEEP Soft Key Menu.
FROM TO OFFSET SWEEP DONE
MTR
MNU
NEXT
Press the FROM key and the following appears.
Scan/Sweep - SWEEP - FROM Soft Key Menu.
BKSP ENTER RETURN
MTR
MNU
NEXT
Select the desired even numbered channel containing the sweep starting frequency and press ENTER. The menu will switch
back to the Scan/Sweep - SWEEP menu as shown below.
Scan/Sweep - SWEEP Soft Key Menu.
FROM TO OFFSET SWEEP DONE
MTR
MNU
NEXT
Press TO key and the following appears.
Scan/Sweep - SWEEP - TO Soft Key Menu.
BKSP ENTER RETURN
MTR
MNU
NEXT
Select the desired odd numbered channel containing the sweep ending frequency and press ENTER. The menu will switch back
to the Scan/Sweep - SWEEP menu as shown below.
Courtesy of http://BlackRadios.terryo.org