Culligan 9" - Page 32

28
01021076
1)INFORMATION
>2)MANUAL MODE
3. This is the MAIN MENU SCREEN. The “>” symbol indicates the
menu selection. Press or to scroll through the menu.
4. Press to select a setting.
MANUAL MODE
REGEN NOW
5. The screen displays the setting (Manual Mode) and the current value
(Regen Now). Press to change the value.
MANUAL MODE
>REGEN NOW
6. The screen displays the “>” symbol next to the value, indicating that
the value may be changed. Press or to change the value. For
example, press to change the value to REGEN TONITE. Press
again to select the next available value, BYPASS.
MANUAL MODE
REGEN NOW
7. Press to cancel the changed setting and revert to the default set-
ting. The screen displays the default setting.
MANUAL MODE
>BYPASS
8. Press to accept the changed value. If the setting values are dis-
played, the “>” symbol no longer appears next to the value.
1)INFORMATION
>2)MANUAL MODE
9. The screen then returns to the MAIN MENU. Press to return to
the HOME SCREEN.
Softening
JAN-01-13 12:01P
10. The screen displays the HOME SCREEN.
NOTE Unplugging the Culligan HE water softener will not affect any of the control
settings (the control must be plugged in for at least 10 minutes). Once
programmed, the settings will be stored indefinitely.