Culligan CSM Series User Manual

28 Culligan® CSM Series Softeners
28 Cat. No. 01016370
Wiring Procedures and Diagrams
Preperation:
1. Loosen the two screws securing the controller access cover (Figure 40) on each controller provided.
2. Using a small screwdriver, loosen all the terminal strip binding screws on the main circuit board that do not con-
tain wires by turning counterclockwise until the wire clamp has been fully opened (see Figure 41).
Figure 40.
Figure 41.

Culligan CSM Series Specifications

General

Brand	Culligan
Model	CSM Series
Category	Water Dispenser
Language	English