CUMMINS ALLISON JetScan MPX 8200 User Manual

14 | JetScan
®
MPX 8200 strapping and corner module | Conguring strap length and printing
8. The value under Characters Remaining on the bottom right side of the screen
indicates character-limit status.
If the number is positive and highlighted in green, additional characters can be
used.
If the number is negative and highlighted in red, the 40-character limit is exceeded.
If the combined settings are not reduced to 40 characters or less, the Text (custom
message) is cut off after the 40th character.
To bring the combined number of characters below the 40-character limit, do one or
both of the following:
•ReducethelengthoftheText(custommessage).PressCustomize and use the
backspacekey to change the message.
•DisabletheDate,TimeorOperatorID.
9. When conguration is complete:
a. Press Save, followed by OK to prompt the ProcessingTypeSetup tab / Settings
screen.
b. Press the ExitSetup tab to prompt the Menu tab screen.
c. Press the Processing tab to prompt the main-processing screen.

CUMMINS ALLISON JetScan MPX 8200 Specifications

General

Brand	CUMMINS ALLISON
Model	JetScan MPX 8200
Category	Packaging equipment
Language	English