Pulling Rope should be the onl
thing to contact the capstan. NEVER let swivels, grips,
t
. come in contact with the ca
stan.
ARNIN
Ro
e must ALWAYS be
ulled over a rotatin
sheave. If a sheave does not rotate
turn
cable puller off immediatel
and determine the problem before continuing the pull.
ARNIN
Keep as much rope confined in the conduit as possible. This will help prevent in
ur
should the rope break and whip violentl
.
ARNIN
When makin
a vertical cable pull, keep the area underneath the cable pull clear
of all
ersonnel.
ARNIN
NEVER allow the rope to overlap on the capstan. If this condition be
ins to occur,
immediatel
release the tailing
orce on the rope so that the rope can
eed back
toward the conduit or cable tra
. If this does not remed
the overlap, turn off the
cable puller immediatel
. There is no known solution for ro
e overla
ARNIN
OPERATING INSTRUCTIONS continued . . .
To Next Page
Loading...