Curtis 1212S - Page 16

Curtis 1212S Manual, R ev. B
13
3 — PROGRAMMABLE PARAMETERS: M1/M2 Speed Parameters
SPEED MENU
ALLOWABLE
PARAMETER RANGE DESCRIPTION
M1/M2 Max Speed 0–100% Duringforwardoperation,denesthemaximumspeedallowedatfullthrottle.
M1/M2 Rev Max Speed 0–100% Duringreverseoperation,denesthemaximumspeedallowedatfullthrottle.
SPEED MODES
The 1212S controller’s Multi-Mode™ feature allows operation in two distinct
modes: Mode 1 and Mode 2. These modes can be programmed to provide two
different sets of operating characteristics, which can be useful for operation in
different conditions. For example, Mode 1 could be programmed such that the
vehicle moves slowly for precise, indoor maneuvering, and Mode 2 programmed
for higher speed, long distance travel outdoors.
The controller is in Mode 2 when the mode switch is in the On position
(input connected to B+). Leaving the mode input floating or actively switching
it Off (pulling it to B-) puts the controller in Mode 1.
The
Speed menu allows the maximum speed in forward and reverse to
be set independently in Mode 1 and Mode 2. Speed is varied linearly over the
range between the two speeds in each mode, in forward and reverse.