Curtiss-Wright Parvus DuraNET 20-11 - GROUNDING INSTRUCTIONS

Chapter 2 Operational Description
Parvus DuraNET 20
-
11
Curtiss
-
Wright
Page 18 of 44 MNL-0656-01 Rev A8 ECO-N/A Effective: 16 Nov 21
GROUNDING
 The bottom of the baseplate is conductive to allow the system to be grounded via the baseplate.
 Four holes are provided for grounding/mounting. Refer to figure 8 below. These are 6-32 holes
that are approximately 0.47” deep.
Figure 8. Bottom View
.468”