EasyManua.ls Logo

Curtiss-Wright Parvus DuraNET 20-11 - Chapter 1 Introduction; ABOUT THIS DOCUMENT; DESCRIPTION OF SAFETY SYMBOLS

Curtiss-Wright Parvus DuraNET 20-11
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction
-
11
Curtiss
-
Wright
Page 6 of 44 MNL-0656-01 Rev A8 ECO-N/A Effective: 16 Nov 21
CHAPTER 1 INTRODUCTION
The DuraNET 20-11 is an ultra-miniature, rugged, 8-port managed Layer 2 Gigabit network switch. It
contains a MIL-STD-1275/704 power supply in an IP67 (dust/water proof) sealed aluminum chassis with
micro-miniature MIL-DTL-38999 like connectors.
ABOUT THIS DOCUMENT
This manual provides functional and technical descriptions of the DuraNET 20-11 hardware, instructions
on connecting the system to test equipment, connector descriptions and pinouts, and specifications.
DESCRIPTION OF SAFETY SYMBOLS
The following symbols are used in this manual to indicate important information and potentially dangerous
situations.
Warning! Danger, electrical shock hazard!
Personal injury or death could occur. Also damage to the system, connected peripheral devices, or
software could occur if the warnings are not followed carefully.
Caution! Hazard to individuals, environment, devices, or data!
If you do not adhere to the safety advice next to this symbol, there is obvious hazard to individuals, to
environment, to materials, or to data.
Note: This symbol highlights important information or instructions that should be observed.

Related product manuals