Chapter 3 Management Interface
Page 22 of 44 MNL-0656-01 Rev A8 ECO-N/A Effective: 16 Nov 21
CLI COMMAND GROUPS
CLI commands can be grouped into the following functional categories:
Manage and show switch settings.
Manage configuration and firmware files.
Manage system.
Manage Parvus extensions.
Figure 9 shows the list of Exec commands and the commands available in each group. Appendix A
provides more information on the first three command groups, with multiple examples of their use.
Appendix B describes the Parvus extensions, which are specialized commands for viewing board status
and enabling optional board features like zeroization.
Figure 9. CLI Functional Groups
To Next Page
Loading...
