Curtiss-Wright Parvus DuraNET 20-11 - Chapter 4 Connector Descriptions; CONNECTOR PART NUMBERS

C
urtiss
-
Wright
Parvus DuraNET 20
-
11
Chapter 4 Connector Descriptions
MNL-0656-01 Rev A8 ECO-N/A Effective: 16 Nov 21 Page 29 of 44
CHAPTER 4 CONNECTOR DESCRIPTIONS
This chapter identifies connector part numbers, locations, and pinouts to facilitate fabrication of cables
that can connect to the DuraNET 20-11.
CONNECTOR PART NUMBERS
The following table shows the manufacturer part numbers for the DuraNET 20-11 connectors (identified in
Figure 10), together with the suggested mating connectors.
Connector Manufacturer Part Number Mating Connector
J0 Omnetics MNCP-11-WD-18.0-PP-N-OR-IP68
(see Omnetics website for options)
MNCS-11-WD-XX-C-IS-N-SR-OR
(see Omnetics website for options)
J1 Glenair 801-033-07M13-37SA 801-008-16M13-37PA
J2 Glenair 801-033-07M13-37SB 801-008-16M13-37PB
Figure 10. Front Panel Connector Spacing