Need help?Do you have a question about the Curtiss-Wright DuraNET 3300 and is the answer not in the manual?
General| Brand | Curtiss-Wright |
|---|---|
| Model | DuraNET 3300 |
| Category | Switch |
| Language | English |
Overview of the manual's content and structure.
Detailed breakdown of each chapter's content.
Glossary of terms used throughout the document.
Explains warning, caution, and information symbols.
Detailed explanation of the DuraNET 3300's capabilities and design.
Lists key hardware and software features of the DuraNET 3300.
Highlights the integration of Cisco IOS-XE and related technologies.
Details the unit's compliance with military environmental standards.
Outlines the primary use cases for the DuraNET 3300.
Describes different EAU and Production unit configurations.
Visual representation of the DuraNET 3300's internal components.
Identifies available cable sets for connecting the unit.
Step-by-step guide for physically connecting cables.
Instructions for connecting to the device's command line.
Guides installation of PC software for console access.
Procedure to configure a static IP address on a PC.
Steps to configure Windows firewall for network access.
Specific instructions for connecting via USB console.
Specific instructions for connecting via RS-232 console.
Commands to re-enable essential settings after zeroization.
Identifies physical connectors on EAU and Production units.
Details pin configurations for all unit connectors.
Pinout and information for the J1 power connector.
Pinout and information for the J2 I/O connector.
Pinout and information for the J3 I/O connector.
Pinout and information for the J4 optical connector.
Steps to set initial IP, username, and password.
Guide to upgrading the switch's operating system.
Instructions for setting up a TFTP server on Linux.
Steps to configure the TFTP server settings.
Process to copy a new IOS image to the switch.
Details on PoE features and power management.
Process to erase sensitive data and reset the device.
CLI commands for initiating zeroization.
Steps for emergency recovery after zeroization.
Overview of physical and technical specs.
Physical dimensions of the DuraNET 3300 unit.
Weight, chassis material, cooling, finish, and connector types.
Guidelines for installing and mounting the unit.
Options for mounting the unit vertically or horizontally.
Advice on selecting a mounting location for optimal cooling.
Specific steps for vertical installation.
Specific steps for horizontal installation.
Instructions for grounding the unit.
Details power input requirements and consumption.
Operating and storage temperature/humidity specs.
Operating and storage temperature ranges.
Specifications for shock and vibration resistance.
Details on electromagnetic interference compliance.
Environmental conditions for operation and storage.
Features and capabilities of the Cisco IOS-XE software.
How to identify the unit using P/N and serial number.
Contact information for technical support.
Procedure for returning the product for repair or service.
Solves a common connection issue with Firefox.
Guide to install and configure Minicom on Ubuntu.
Instructions for installing and using iperf for network testing.
Guide to install and run diagnostic tools.
Maps physical ports to Cisco interface names.
To Next Page
