Curtiss-Wright DuraNET 3300 - Cable Install and Connections

User Manual – DuraNET 3300
Quick-Start Guide
MNL-0676-01 Rev A4
ECO- N/A
Effective: 26 Feb 21
Page 15 of 84
Cable Install and Connections
Figure 2.1: Cable Diagram
1. Connect a power cable (CBL-2883-01) to port J1 on the DuraNET 3300 and the other end of the
cable to the unpowered DC power source.
2. Connect network cable (CBL-2884-01) to port J2 on the DuraNET 3300
a. Connect either the RS-232 or USB communication link to PC1 USB or serial port.
3. Connect network cable (CBL-2885-01) to port J3 on the DuraNET 3300
4. Connect Optical cable (CBL-2886-01) to port J4 on the DuraNET 3300