Curtiss-Wright DuraNET 3300 - Grounding

User Manual – DuraNET 3300
Specifications
Page 68 of 84
MNL-0676-01 Rev A4
ECO- N/A
Effective: 26 Feb 21
Grounding
• The bottom of the baseplate is conductive to allow the system grounding via the baseplate.
• A blind grounding hole for attachment of a grounding cable using a #1/4-20 screw is provided on
the rear of each module of the system.
• It is recommended that you use only one grounding hole. Choose the grounding hole that allows
the shortest grounding cable length.
Caution! The grounding lug tie holes are shallow (0.350”).
Select the proper screw length for your grounding application and avoid over-tightening.
Figure 5.4: Rear View Grounding Hole