Note: Phoenix Contact will not be releasing the 1027478 until sometime in Q3 2020 (delayed from Q4
2019). For customers that must start building a power cable before the 1027478 is available, there is an
alternate solution if the requirement is for a cable that is no more than 10 meters in length. Phoenix
Contact makes cable assemblies with a molded connector on one end, and flying leads on the other end.
The cable assemblies have 14 gauge wires, an overall braid shield, and a thick outer jacket. The jacket
and the braid shield can be removed if they are not required by the application. These cables are stocked
by a few distributors including part numbers and lengths listed in Table 3.4.
To Next Page
Loading...
