• In the left panel
▪ Inbound Rules
▪ Enable both File and Printer Sharing (ICMPv4-In)
This completes opening the firewall port and you can now close all the open windows.
USB Console Port
Physically connect the USB cable from the J2 cable set to a USB port on the PC.
Linux:
• Open a terminal window
• From the terminal window prompt enter
o ~$ sudo minicom
o password for parvus: parvus “if asked for a password”
• Power on the DUT
o Boot information should begin to scroll in this terminal window.
o At the end of the boot listing information “approximately 2.5min” simply hit <return> and
confirm the CLI prompt
▪ switch>
To Next Page
Loading...
