Curtiss-Wright DuraNET 3300 - Figure 2.4: Minicom Baud; Figure 2.5: Minicom Default

User Manual – DuraNET 3300
Quick-Start Guide
MNL-0676-01 Rev A4
ECO- N/A
Effective: 26 Feb 21
Page 17 of 84
• Under setup option enter E and change the Bps/Par/Bits to
▪ 9600 8N1
Figure 2.4: Minicom Baud
• Then save as default and exit
Figure 2.5: Minicom Default
• To confirm correct configuration and communication link
▪ Hit <return> and confirm the Cisco CLI prompt is displayed
o Switch>