Curtiss-Wright Parvus DuraNET 20-11 - EAU CONNECTOR PINOUTS; EAU CONNECTOR PART NUMBERS

C
urtiss
-
Wright
Parvus DuraNET 20
-
11
Appendix A
–
EAU Information
MNL-0656-01 Rev A8 ECO-N/A Effective: 16 Nov 21 Page 41 of 44
PINOUTS
This section provides the pinouts necessary for creating cables that connect properly to this assembly. If
custom cabling is not designed and built by Curtiss-Wright, all EMI and EMC considerations must be
handled by the customer.
CONNECTOR PART NUMBERS
The following table shows the manufacturer part numbers for the DuraNET 20-11-01-E connectors
(identified in Figure 10), together with the suggested mating connectors.
Connector Manufacturer Part Number Mating Connector
J1 Glenair 801-033-07M13-37SA 801-008-16M13-37PA
J2 Glenair 801-033-07M13-37SA 801-008-16M13-37PA