Cuttermasters CM-01P User Manual

www.cuttermasters.com - Toll Free (800) 417 2171
CUTTERMASTER Professional CM-01P User’s Manual
Page 3
Copyright 2017
Toycen This document may not be reproduced in whole or in part without the express written permis-
sion of Toycen Industries
Cuttermasters
2353 Ridgecrest Place
Ottawa ON K1H7V4
Canada
(800) 417-2171
info@cuttermasters.com
Toycen Corporation
808 Proctor Avenue
Ogdensburg NY 13669
U.S.A
(800) 417-2171
info@cuttermasters.com
Section 1.0: Introduction
Congratulations on purchasing your CUTTERMASTER Professional CM-01P.
The CUTTERMASTER has been the best name in bench top end mill sharpeners since 1972 and
that tradition of quality continues with the new professional version. The Cuttermaster Professional
CM-01P has been designed with new features to meet the demands of today’s prototype and pro-
ductionshopsandprovidessuperiorexibilityandeaseofusefortoolregrindingandtoolmodica-
tions.
With the CM-01P you will be able to grind the diameters and ends of standard end mills in one easy
setup. With nine working axes you will also be able to sharpen roughing end mills, reamers (circum-
ferential lands), end gashes, side and face cutters, annular drills, and countersinks. You will be able
togrindreducednecks,cylindergrindsmallrounds,grindWeldonats,andcut-offcarbideorhigh
speed steel tools.
This revolutionary product was designed and built in our own shop. If you have any questions about
this or any of our productool spindle feel free to contact us.
Forward
Contact Info
If you have any service or partool spindle requests, or questions or commentool spindle about this manual,
please feel free to call or write to us at

Cuttermasters CM-01P Specifications

General

Brand	Cuttermasters
Model	CM-01P
Category	Grinder
Language	English