Cuttermasters CM-01P User Manual

www.cuttermasters.com - Toll Free (800) 417 2171
CUTTERMASTER Professional CM-01P User’s Manual
Page 5
1.2 Specications
Imp. Graduations: 0.001
Air Bearing Stroke: 8.5” (266mm)
Air Bearing: Standard 5C Collet
CuttingToolCapacity: 2”shank,9.8”O.D.,8.5”utelengthT-slotdimension–.800x.500x.670
Table feed graduations: 0.0005 x axis carrier travel, 9” plus manual adjustment of 6”
x Axis working space: 26.5” x5 .5”
y Axis working space: 13” x 6.5”
z Axis carrier travel: 5”
Wheel Mounts: 1¼ Wheel Mounting Hubs for standard tool grinder wheels with a 1.25”
arbor.
Wheel Hubs Separate to the motor so that custom wheel hubs can be installed if
needed.
Motortilt:   Innite
Motor: 500 Watt DC Reversing and Variable Speed
Warranty: Two Year on Motor and Control
Net weight: 225 pounds (100 kg)
Dimensions: 31 X “ x 27 Y” x 21” (not including handles) Shipping dimensions - 36” x
33” x 29”
Overview
The CUTTERMASTER Professional has been designed to accommodate a variety of needs. The
tableisalargestableatsurfacewithcarriagedriveunderneath.
This system has been designed to be easy to use and maintain. As with all machine tools care must
be taken to keep all working surfaces clean and in good repair. There are four main components to
your CUTTERMASTER Professional:
• the CUTTERMASTER Professional CM-01P Universal Base
• the Toycen Radius Air Spindle and assembly
 • theToycenInniteTwinSpindleDCMotorTowerandassembly
• the DC control
The tower and tool spindle carriages can be removed, cleaned and reinstalled very easily with the
removal of the drive bolts.
Thetoolrestisacentraltothemachinepivotandisextremelyeasytouse.Theairbearingxtures

Cuttermasters CM-01P Specifications

General

Brand	Cuttermasters
Model	CM-01P
Category	Grinder
Language	English