CVS 271243 - User Manual

Questions and Answers

D
Diane TerryAug 13, 2025
What to do if CVS Blood Pressure Monitor values are too low or too high?
- D
  Devon GregoryAug 13, 2025
  If your CVS Blood Pressure Monitor frequently fails to measure blood pressure, or the values are too low or too high, make sure the cuff is correctly fitted on your arm and isn't too tight. Also, ensure clothing isn't exerting pressure on the arm above the measuring position; remove any such clothing if necessary. Finally, try taking another measurement in a completely quiet environment.
R
Rebecca BellAug 17, 2025
How to fix a blank display on my CVS 271243?
- M
  Manuel ZavalaAug 17, 2025
  If the display of your CVS Blood Pressure Monitor remains blank when switched on, even with batteries in place, first check the battery polarity and correct it if necessary. If the display is unusual, remove the batteries and insert new ones.
S
shughesAug 20, 2025
What to do if CVS Blood Pressure Monitor readings differ from doctor's?
- M
  Mark BensonAug 21, 2025
  If the blood pressure values measured by your CVS Blood Pressure Monitor differ from those measured by your doctor, record the daily development of the values and consult your doctor about them.
A
Alejandra GarrisonAug 25, 2025
Why does CVS 271243 Blood Pressure Monitor show different readings every time?
- D
  Darryl JohnsonAug 25, 2025
  If your CVS Blood Pressure Monitor displays different values with each measurement, even when functioning normally, it may be due to natural changes in your blood pressure. Your readings may be accurate, but it's best to consult your doctor to be sure.
M
Matthew BrownAug 27, 2025
How to fix CVS 271243 Blood Pressure Monitor when pressure doesn't rise?
- A
  Alexander MorrisAug 28, 2025
  If the pressure does not rise on your CVS Blood Pressure Monitor when pumping the inflation ball, check the connection of the cuff tube and connect it properly if necessary.
L
larsonstevenAug 31, 2025
What to do if my CVS 271243 displays ER 5?
- T
  Thomas JamesAug 31, 2025
  If your CVS Blood Pressure Monitor displays 'ER 5', take another reading. If the error continues, contact your doctor.
S
Stephanie Rich MDSep 4, 2025
What does ER 1 mean on CVS 271243 Blood Pressure Monitor?
- J
  Jeffery LevySep 4, 2025
  The 'ER 1' error on your CVS Blood Pressure Monitor can occur if the systolic pressure was determined but afterwards the cuff pressure fell below 20 mmHg, or if no pulse was detected. Check the tube connection.
M
Mr. Edward SanchezSep 7, 2025
What does ER 2 mean on CVS 271243 Blood Pressure Monitor?
- R
  Rhonda BarberSep 8, 2025
  The 'ER 2' error on your CVS Blood Pressure Monitor can appear if the pressure dropped below 20 mmHg without a measurement taking place, or if the release valve was pressed or the arm moved during the measurement.