4.2. Setting the date and time
1. After the new batteries are activated, the year
number flashes in the display. You can advance
the year by pressing the "M" button. To confirm
and then set the month, press the time button.
2. You can now set the month using the "M" but-
ton.
To confirm and then set the day, press the time
button.
3. Please follow the instructions above to set the
day, hour and minutes.
4. Once you have set the last minute and pressed
the time button, the date and time are set and
the time is displayed.
5. If you want to change the date and time, press
and hold the time button down for approx. 3 sec-
onds until the year starts to flash, then release
and press the time button again. The year will
now be flashing and you can enter the new val-
ues as described above.
14
Memory
Button
Time/Date
Button
To Next Page
Loading...
