CYBELEC CybTouch 12 - Naming Tools; Punch Naming Conventions; Die Naming Conventions

14/38
Sept.
2014
V3.1
Material used and thickness
Current cycle activity information
Tools Management
Bend Correction
Back gauge (X & R axes)
Correction
Start – Stop
More Page
Menu Button
TouchProle Mode
Interactive message line
Back gauge (R axis)
position value (optional)
Beam (Y axis) position
value / bend angle
Back gauge (X axis)
position / ange length
Add step or next step
Program number
Current step (sequence) number
Repeat sequence button
(inactive here)
Material thickness
Material sigma
Bending length
Force
Back gauge manual
control
Return to Bend
Numerical Page
Crowning
Opening (TDC)
Dwell time
Speed change threshold and bending speed
LazerSafe
Back gauge nger type
Step bending
Slow speed return
Number of parts
Back gauge retraction
Next step
Material
CybTouch 12 PS User Manual
More paGe
bend nuMerical paGe
baSiC PaGe deSCriPtion
Bend Numerical Page →