Cyber Power CPS3000 - Functional Indication and Alarm

3.3 Functional Indication and Alarm
Table3.1: LED fault indication and alarm
LED : Red
LED Note
Output overload 100~115% error
Output overload 115~150% error
Output overload 150-200% error
Over Temperature error
INV. OVP (3-s)
INV.UVP (1-s)
DC Link OVP (3s & Alarm)
DC Link UVP (1s & Alarm)
INV fault error (Short)
Battery Shutdown (Low: No Alarm)
Note: Flash per second Light on Light off
LED : Orange
LED Note
Fan locked. Shutdown
Remote shutdown
Battery bad. Shutdown
EEPROM error
Note: Flash per second Light on Light off
EN
9