EasyManua.ls Logo

CyberPower PowerPanel - Client Network Configuration and Setup; Device Network Address Configuration

CyberPower PowerPanel
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PowerPanel™ Business Edition
36
z Current Rating: The output current rating (Amps) of the UPS/PDU.
z Voltage Rating: The output voltage rating (Volts) of the UPS/PDU.
z Frequency Rating: The output frequency rating (Hz) of the UPS.
z Battery Replacement Date: The date that the batteries were last replaced.
z NCL Outlet: The amount of NCL (Non-Critical Load) outlets in the UPS.
z External Batteries: The number of external battery packs connected to the UPS.
z Name: The name of the UPS/PDU.
z Location: Where the UPS/PDU is located.
z Contact: Who to contact about the UPS/PDU.
z MAC Address: The MAC address of the UPS RMCARD, PDU or Agent’s network interface.
z IP Address: The IP address of the UPS RMCARD, PDU or Agent’s network interface. Click the hyperlink
to open the web interface of the UPS RMCARD, PDU or Agent.
Note: Not all models provide the same information. The information displayed will vary by model.

Other manuals for CyberPower PowerPanel

Related product manuals