43
4. Open SafeLock Belt Tensioner.
5. Route both vehicle belts under the
SafeLock Belt Tensioner and through
the blue belt guides on both sides of the
Base. BUCKLE THE BELT. Make sure
the belts lay at and are not twisted.
The vehicle belt should ALWAYS be
routed UNDER the tab on the Belt
Guide. NEVER place a vehicle belt over
the tab on the Belt Guide, even in a
vehicle with longer buckle stalks.
Installing and Removing the Infant Carrier
Installing with Base Using Lap/Shoulder Belts
rr
tt
To Next Page
Loading...
