CYBEX gold CLOUD G User Manual

44
6. On the buckle side, rst lift up on the
shoulder belt to remove slack in the
lap belt. Then remove slack from the
shoulder belt on the opposite side.
At this point, only remove slack from
the vehicle belts, being careful not
to overtighten. The SafeLock Belt
Tensioner will tighten the system fully.
7. Press down on SafeLock Belt Tensioner
until it locks into place.
If Belt Tensioner does not lock, try
loosening the vehicle belt slightly.
Installing and Removing the Infant Carrier
Installing with Base Using Lap/Shoulder Belts
yy
uu

CYBEX gold CLOUD G Specifications

General

Brand	CYBEX gold
Model	CLOUD G
Category	Car Seat
Language	English