CYBEX gold CLOUD G User Manual

78
Removing and Replacing Seat Covers
9. Place the Infant Carrier in Full Recline
Mode (pg. 32), then pull the harness
buckle out of the seat cover and remove
the seat cover from around the Harness
Adjuster.
10. Remove the seat cover from the carrier.
NOTE: Be sure to remove the rear
corners of the seat cover from the tabs
on the inside of the seat before fully
removing the cover.
Installing the Seat Cover
1. With the Infant Carrier fully reclined,
install the seat cover to the Infant
Carrier, being sure to pull it over the tabs
on the inside of the seat shell.

CYBEX gold CLOUD G Specifications

General

Brand	CYBEX gold
Model	CLOUD G
Category	Car Seat
Language	English