EasyManuals Logo

CYBEX gold SIRONA S User Manual

CYBEX gold SIRONA S
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
68
INSTALLING CHILD RESTRAINT WITH LAP/SHOULDER BELT
(PREFERRED METHOD)
6
7
6. Pull out vehicle belt to form single length of
about 60 cm (24 in). Hold Buckle Tongue in
one hand and squeeze lap and shoulder belts
together in other hand.
7. Route vehicle belts up through vehicle belt
path opening on side of Base, through
Belt Guide, under Belt Tensioner, through
opposite Belt Guide, and down through
opposite belt path opening. BUCKLE THE
BELT. Make sure belts are underneath tabs
on belt guide and lie flat without twisting.
NEVER place vehicle belt over Belt
Tensioner, even in a vehicle with longer
buckle stalks. This will prevent proper
operation of the Child Restraint.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX gold SIRONA S and is the answer not in the manual?

CYBEX gold SIRONA S Specifications

General IconGeneral
CategoryConvertible Car Seat
Height LimitUp to 49 inches
Rotation360-degree rotation
Harness Type5-point harness
Child HeightUp to 49 inches
DirectionRear-facing and Forward-facing
InstallationLATCH system
Safety FeaturesEnergy-absorbing shell
FabricMachine washable cover
StandardFMVSS 213
HeadrestAdjustable headrest
Child AgeBirth to 4 years approximately
Additional FeaturesMagnetic belt holders, Load leg base

Related product manuals