77
Removing and Replacing Seat Cover
11. Place the Infant Car Seat in Full Recline
Mode (pg. 27), then pull the Harness
Buckle out of the Seat Cover and
remove the Seat Cover from around the
Harness Adjuster.
12. Remove the Seat Cover from the Infant
Car Seat.
NOTE: Be sure to remove the rear
corners of the Seat Cover from the tabs
on the inside of the seat before fully
removing the cover.
Installing the Seat Cover
1. With the Infant Car Seat fully reclined,
install the Seat Cover to the Infant Car
Seat, being sure to pull it over the tabs
on the inside of the seat shell.
To Next Page
Loading...
