78
Removing and Replacing Seat Cover
2. Install the Seat Cover around the
Harness Adjuster, then feed the Harness
Buckle into the Seat Cover.
3. Replace the backrest cover, being sure
to pull it over the tabs on the inside of
the seat shell.
4. Extend the L.S.P. Device on both sides
of the seat.
5. From back of seat, replace seat cover
over L.S.P. locks and into channels
around both L.S.P., then feed elastic into
channel channel under back panel.
6. Snap two dual action snaps at side of
carrier.
To Next Page
Loading...
