6. Turn the tube nut with your fingers until it measures the correct center to center length. This length
is measured from the center of the top hole to the center of the bottom hole.
Qty.DescriptionItem
11.75” (29.8
cm)
Center to center
length
1
1Tube Nut2
7. Unplug the power cord from the power outlet.
Parts Replacement
Base Assembly
End Caps
Tools Required:
• Phillips screwdriver
Remove end caps
1. Remove two screws securing right end cap using a Phillips screwdriver.
Qty.DescriptionItem
2Screws1
1Right end cap2
2. Repeat step for left end cap.
Page 104 of 209
Cybex 625T Treadmill Part Number